Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022 (Reposting)
Request for QuotationBAC Resolution
Notice of Award
Contract of Service
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022 (Reposting) with ABC of Five Hundred Seventy Thousand pesos only in words and Php 570,000.00 in figures. Reference No. A2022-00-025
Details: PR No. A2022-00-025
1 Lot Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022
Item Description
Qty
Unit
Approved
Unit Cost
Supplier’s Price per Unit
Supplier’s
Total per Item
Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022
Airconditioning Units at:
Academic Building 1
Academic Building 2
Academic Building 3
Residence Hall 1 lot see details below
Scope of Works:
A. Monthly Preventive Maintenance of Aircondition Units
1. Monthly Check-up of Aircon Units
2. Monthly Cleaning of filter cover
3. Checking of whole system cooling performance
4. Checking of drain line for possible clogging
5. Observe ACU operation
B. Trimester General Cleaning of Aircondition Units
1. General Cleaning of Aircondition units
2. General Cleaning of evaporator and condensing units
3. General Check-up of all units and recommend repair and replacement of defective parts if any
4. Observe Operation and checking of ampere reading
5. Check selector switch, thermostat control and magnetic contactors
6. Labor and Supervision
BREAKDOWN: Per Trimester - ₱190,000.00
Window Type 3 units ₱833.33
Split Type 104 units ₱1,500.00
Ceiling Type 12 units ₱1,500.00
Floor Mounted 9 units ₱1,500.00
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
Proponent must submit an Omnibus Sworn Statement upon receipt of Notice of Award
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until February 10, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 430
Supply, Delivery, Installation, and Commissioning of Air Conditioning Unit and Edge Router for the Academic Building 2 Server Room of PSHS-CLC
Request for ProposalBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for Supply, Delivery, Installation, and Commissioning of Air Conditioning Unit and Edge Router for the Academic Building 2 Server Room of PSHS-CLC with ABC of Two Hundred Ninety Thousand Pesos only in words and Php290,000.00 in figures. Reference No. S2022-01-005
Details: PR No: S2022-01-005
1 Lot Supply, Delivery, Installation and Commissioning of Air Conditioning Unit and Edge Router for the Academic Building 2 Server Room of PSHS-CLC
Technical Specifications
I. Air Conditioning Unit
- Must be a wall mounted inverter split type.
- Have at least 3HP capacity with a rated cooling capacity of at least 7,200 up to 25,600 Btu/hr (at least 2.1 up to 7.5 kW).
- Must be a single phase 220V 60Hz with a running current of at least 10A.
- Piping connection diameter of 16mm, 15.9mm and 6.4mm for drain, gas, and liquid respectively.
- Must have a Coefficient of Performance of at least 3.18 W/W with a power consumption of 2.2kW ± 5% tolerance.
- Should feature mold-proof operation and self-diagnosis with remote. - For the indoor unit:
• Must have an air flow rate of at least 19.4 (685) m3/min.
• Have at least 5 steps fan speed with quiet and automatic features. - For the outdoor unit:
• Compressor type must be hermetically sealed swing type with motor output of at least 1.3kW.
• Refrigerant must be R32 with at least 1.05Kg charge.
II. Edge Router
• - At least one (1) unit with complete rack mounting accessories.
• - Enclosure must be made of SGCC steel.
• - Must have at least ± 24 kV ESD/EMP protection for air and contact.
• - Must have at least 8MB NOR Flash and at least 4 GB eMMC NAND Flash on-board storage.
• - Power method should have at least hot-swappable and AC/DC features.
• - Must support 100 to 240 VAC, 24 VDC output voltage range.
• - Must have at least eight (8) SFP+ ports, one (1) RJ45 Gigabit Ethernet Port and one (1) RJ45 Serial Port.
• - Must have at least 18,000,000 pps Layer 3 forwarding performance of 64 bytes packet size and 80 Gbps (line rate) for 1514 bytes packet size.
• - System memory must be at least 16 GB DDR4 RAM.
• - Processor must be MIPS64 with at least 16 Core and 1.8 GHz with Hardware Acceleration for Packet Processing.
• - Must be compatible with the existing Ubiquiti devices of the campus.
• - Can be managed using Web UI, Ubiquiti Network Management System, CLI, and SNMP.
• - Must include DHCP Server, DHCP Relay, Dynamic DNS, DNS Forwarding,VRRP, RADIUS Client, Web Caching, and PPPoE Server in its services.
• - Should have its own ACL-Based and Zone-Based Firewall security with Application Identification with Deep Packet Inspection feature.
• - Must support Static Routes, OSPF/OSPFv3, RIP/RIPng, BGP, IGMP Proxy, and MPLS routing capabilities.
• - With Static IPv4/IPv6 and DHCP/DHCPv6 addressing schemes.
• - Should have an interface/encapsulation of Ethernet, 802.1q VLAN, PPPoE, GRE, IP in IP, Bridging, and Bonding (802.3ad).
Scope of Works
I. Materials
- All parts, fittings, wall bracket, copper tubing, pipe insulations, heat reflective aluminum insulations, welding job consumables and other incidental materials necessary for the installation, shall be carried by the supplier.
II. Installation
o - Install a steel bracket if necessary.
o - Install new indoor and outdoor of ACU with proper handling and safety.
o - Install new pipes with proper insulation and bracket or hanger.
o - Install complete electrical works necessary.
o - Install reflective aluminum insulation for the windows of the Server Room.
o - Connect all necessary piping, electrical conduit and wiring, controls, ductwork, condensate, insulation, and necessary accessories.
o - Proper installation of draining pipe and make sure that it flows continuously.
III. Testing
o - Compressor current and cooling temperature shall be tested and demonstrated to the Information Systems Analyst (ISA) or Authorized Representative of PSHS-CLC.
o - Run equipment, observe its operation, and read instruments and gauges, including volt-ohms meters; find out temperature gauges and adjust mechanisms, including valves, pumps, and controls to direct levels of fluid, temperature, and pressure.
o - ACU will be switched on and cooling effect will be checked.
o - ACU will be switched on and off 10 times in one hour following recommended procedures. Water drain shall be checked by flowing water.
IV. Warranty
o - Product or manufacturing defects: one (1) year from the date of acceptance
o - Compressor defects: five (5) years from the date of acceptance
o - Workmanship/installation works: one (1) year from the date of acceptance
Project Schedule
I. The project delivery and installation of works shall be carried out within thirty (30) calendar days upon the date of the agreed contract. The completion schedule provided shall only be considered extended under the following:
- Delays caused by force majeure events such as earthquake, flood, typhoon,
cyclone and other catastrophic phenomena of nature and misfortunes which are unforeseeable circumstances. The period or number of days of extension shall be determined and agreed upon with PSHS-CLC in writing. Claims for time extension of the contract period due to force majeure shall be subject to approval by PSHS-CLC.
Plans and Designs
I. Electrical layout of the building and the proposed installation diagram.
Proponent must indicate in its proposal the brand and model of each equipment to be installed
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
Proponent must submit an Omnibus Sworn Statement after receipt of Notice of Award
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until February 10, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 427
Supply and Delivery of UV Care Pocket Sterilizer, Air Purifier with UV Sterilization, and Filter for UV Care Clean
Request for QuotationBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Supply and Delivery of UV Care Pocket Sterilizer, Air Purifier with UV Sterilization, and Filter for UV Care Clean with ABC of Three Hundred Thirty-Six Thousand Five Hundred Pesos only in words and Php 336,500.00 in figures. Reference number: SPPMP 2021-11-003
Details: PR 2021-11-008-02
Item No. Item Description Qty Unit Approved Unit Cost Supplier's Price per Unit
1
UV care pocket sterilizer
*Eliminates up to 99.9% of harmful germs, bacteria, viruses, allergens and molds using UV-C light technology. Lab-tested, chemical free, and doctor-recommended Perfect for sanitizing mobile phones, gadgets, keyboards, door knobs, toys, pacifiers, high chairs and countertops Portable, lightweight, and easy-to-use clamshell design To use, simply flip open the unit and press the “ON” button for five seconds. Shine light within 1/4 inch of the surface to disinfect for a few seconds. Move the light slowly so it illuminates the area for a min. of 15 seconds (however, the longer the exposure the better) before moving the lamp to the next section to achieve up to 99.9% disinfection. Safety switch feature turns the UV-C light off when turned upward Powered by four AAA batteries or Mini USB Cable Product Dimensions: 24 cm (L) x 8.9 cm (W) x 2.54 cm (H) Weight: 0.3 kg 1 pc. ₱1,400.00
2
Air Purifier with UV Sterilization *Power: 50W; Unit Dimensions: 303 x 270 x 562 mm
Features:
6 Stage Purification System
* Pre-Filter
* Anti-Bacterial PET Skeleton
* HEPA FIlter H11
* Carbon Filter
* UV Light
* Cold Catalyst Oxidation
PM 2.5 Infrared Dust Sensor, LED Display, Filter Replacement Reminder, 2/4/8 Hour Timer, Wifi Capable, Anion (ionizer) is not a filter but is released together with the filters
With UV lamp 1 pc. ₱12,000.00
3 Filter for the UV care clean air 6 in 1 purifier *Medical Grade H13 Filter
Activated Carbon Filter
Photo Catalyst Filter 1 pc. ₱3,100.00
4
Air Purifier
branded and heavy duty
6 Stage Purification System
* Pre-Filter
* Anti-Bacterial PET Skeleton
* HEPA FIlter H11
* Carbon Filter
* UV Light
* Cold Catalyst Oxidation
with infrared dust sensor
LED display
with ionizer
with warranty
6 pcs. ₱10,000.00
Details: PR 2021-11-005-03
Item Description Qty Unit Approved Unit Cost Supplier's Price per Unit Supplier’s Total per Item
Air Purifier with HEPA Filter
Specifications:
40 sq.m.
Plasmacluster Ion Technology
Uv-Light and Glue Sheet
Pre filter, HEPA Filter and Deodorizer
Clean Indicator Sign and Dust Sensor
Inverter Operation
UV-Light and Glue Sheet 13 pcs. ₱20,000.00
Partial bid is allowed.
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until JANUARY 26, 2021, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 457
Supply, Delivery, Repair, and Installation of Membrane Filters of Water Distiller (ThermoScientific Smart2Pure 3, Barnstead)
Request for QuotationBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Supply, Delivery, Repair, and Installation of Membrane Filters of Water Distiller (ThermoScientific Smart2Pure 3, Barnstead) with ABC of ONE HUNDRED TWENTY-FOUR THOUSAND TWO HUNDRED TWELVE PESOS only in words and Php 124,212.00 in figures. Reference No: S2022-01-002
Details: PR No. S2022-01-002
1 Lot Supply, Delivery, Repair, and Installation of Membrane Filters of Water Distiller
Item No.
Item Description
Qty
Unit Approved Unit Cost Supplier's Price per
Unit
Supply, Delivery, Repair, and Installation of Membrane Filters of Water Distiller
Property number: 0000215
Location: Acad. Bld. II, Room 307
Specifications:
*all of the below mentioned should be compatible with ThermoScientific Smart2Pure 3, Barnstead (S/N: 4201857, Order Code 50129869) 1 lot see details below
1. RO Membrane + integrated pretreatment (CAT # 09.2003 1 Unit ₱24,358.95
2. Ultra-Pure Polishing Cartridge (CAT #
09.1020) 1 Unit ₱37,918.87
3. Hardness stabilizer cartridge for 09.4001 (CAT # 06.5204 1 Unit ₱10,079.03
4. 1μM filter for 09.4003 (CAT # 06.5101) 1 Unit ₱4,791.60
Service charge for Repair and installation of above items 1 Unit ₱42,812.00
Proponent must submit Omnibus Sworn Statement after signing of Notice of Award
Proponent must follow Health and Safety Protocol of the Campus during conducting site visit and actual repair at site
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 25, 2022 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 427
Supply and Delivery of Medical Supplies of PSHS-CLC for CY 2022
Request for QuotationBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Supply and Delivery of Medical Supplies of PSHS-CLC for CY 2022 with ABC of Nine Hundred One Thousand Five Hundred Fifty-Five Pesos only in words and Php 901,555.00 in figures. Reference No: A2022-00-010
Details: PR No. A2022-00-010
Item No. Item Description Qty Unit Approved Unit Cost Supplier's Price per Unit
1. Alcohol prep pad 100's 3 boxes ₱100.00
2. Aloe Vera Soothing & Moisture Gel 92% 2 tube ₱310.00
3. Ambroxol (Ritemed) tablet 30mg 100 pc ₱10.00
4. Bilastine (Bilaxten) 20 mg Tablet 100 pc ₱30.00
5. Biogesic 300 pc ₱6.00
6. Bisacodyl (Dulcolax) 5mg/tab 48 pc ₱25.00
7. Butamirate citrate (Sinecod Forte) SR tablet 50mg/tab 100 pc ₱23.00
8. BSI Medicated Spray - Pain Reliever 2 bottle ₱460.00
9. Calamine (Caladryl) lotion 30ml 10 bottle ₱150.00
10. Calmoseptine 555.7 mg / 164.5 mg / 3.5 g Ointment (20's) 2 box ₱830.00
11. Cetirizine (Ritemed) 10 mg Tablet 100 pc ₱18.00
12. Clonidine (Catapres) 75mcg 10 pc ₱35.00
13. Decolgen No-Drowse 25 mg / 500 mg Tablet 100 pc ₱9.00
14. Dextromethorphan + Phenylpropanolamine + Paracetamol (Tuseran Forte) Capsule 50 pc ₱13.00
15. Indoplas Disposable Face Mask 3-Ply with Earloop 1 box (50 pcs) 20 box ₱200.00
16. Domperidone (Motilium) 10mg/tab 50 pc ₱35.00
17. Efficascent Oil Extra Strength 25ml 25 bottle ₱35.00
18. Erceflora Bacillus Clausii 2Billion/5ml Oral Suspension 50 pc ₱45.00
19. Flammazine Silver Sulfadiazine Cream 5g 5 tube ₱320.00
20. Gauze Sponge 4×4 non-sterile, (100’s) 2 pack ₱160.00
21. Gaviscon Double Action chewable tablet 8pcs/pack 10 pack ₱160.00
22. Green Cross Isopropyl Alcohol 70% w/ Moisturizer (500ml) 20 pc ₱105.00
23. Hyosine-N Buty bromide - Paracetamol (Buscopan Venus) 100 pc ₱32.00
24. Lysol Anti-bacterial Hand Soap 225ml (Skincare) 10 pc ₱120.00
25. Hexetidine (Bactidol) Oromucosal Solution 250ml 5 bottle ₱340.00
26. Hidrasec Racecadotril 100mg 1 Capsule 50 pc ₱55.00
27. Hydrocortisone (Hovicor) cream 15g 3 pc ₱260.00
28. Ibuprofen (Advil) 50 pc ₱10.00
29. Ibuprofen+Paracetamol (Alaxan FR) 200mg/325mg cap 50 pc ₱8.00
30. Kamillosan Anti-Inflammatory Spray Solution 150ml 2 bottle ₱450.00
31. Koolfever Sheets Adult Extra Cool - 2s 15 pack ₱60.00
32. Kremil-S Advance Chewable Tablet 50 pc ₱23.00
33. Lansoprazole (Prevacid FDT) Tablet 30mg 30 pc ₱110.00
34. Loperamide (Diatabs) 2mg/cap 50 pc ₱8.00
35. Lysol Disinfectant Spray Early Morning Breeze Scent 510g 10 pack ₱560.00
36. Lysol Multipurpose Surface Wipes Lemon 80s 5 pack ₱280.00
37. Meclizine HCl 25mg Chewable Tablet 50 pc ₱15.00
38. MED GUARD Cotton Balls 50s 30 pack ₱25.00
39. Mefenamic Acid (Dolfenal) 250mg/tab 100 pc ₱20.00
40. Metoclopramide HCl (Plasil) 10mg/tab 30 pc ₱16.00
42. Miconazole (Daktarin) Oral Gel 3.5g 5 tube ₱270.00
43. Mupirocin (Bactroban) ointment 5g 6 tube ₱360.00
44. Nafarin A Tablet 50 pc ₱9.00
45. Nexcare Reusable Hot and Cold Pack 3m 3 pc ₱350.00
46. Omega Pain Killer 120ml 20 bottle ₱120.00
47. Omeprazole (Prosec) 20mg/cap 100 pc ₱33.00
48. Sinupret Forte 100 pc ₱20.00
49. Phenylephrine + Ibuprofen (Bioflu Non-Drowsy) Tablet 100 pc ₱12.00
50. Povidone-Iodine Wound Solution 10% 15ml 30 pc ₱70.00
51. Rycortech 4ply earloop Face Mask SoftCool Peppermint Honeycomb 50pcs/box 6 box ₱670.00
52. Rycoretech Prime Plus 4 ply face mask 50pcs /box 6 box ₱660.00
53. Salbutamol (as sulfate) Aero-Vent/Bronchodilator 30's 1 pack ₱480.00
54. Salbutamol (Ventolin) Anti-asthma 20's 2 pack ₱840.00
55. Salonpas Medicated Patch 10pcs/pack 50 box ₱60.00
56. Sanicare Cleansing Wipes anti-bacterial 80 sheets 10 pack ₱125.00
57. Strepsils Max Lozenges - Pack of 6s 20 sachet ₱90.00
58. Strepsils Soothing Honey & Lemon Blister Pack 24s 3 box ₱190.00
59. Transpore Tape, 3M (1″ – 12 pcs / box) 1 box ₱1,000.00
60. Visine 500 mcg / ml 15 ml Opthalmic Drops 2 bottle ₱170.00
61. Visine Refresh Drops 6 ml Solution 1 bottle ₱120.00
62. White Flower Medicine Oil Classic No. 1 20ml 20 bottle ₱330.00
63. Glade Automatic Refill - Ocean Escape 175g 5 bottle ₱250.00
64. Glucose Strips, ONE TOUCH SELECT (25’s) 1 bottle ₱700.00
65. One Touch Ultra Soft Lancets - 100s 1 bottle ₱520.00
66. Ziploc Double Zipper Freezer Large Storage Bags 50s 1 pack ₱400.00
67. Kleenex KF94 Respiratory Mask (Medium black - 5pcs/pack) 30 pack ₱270.00
68. Heating Pad, ROSSMAX HP3040A 1 pc ₱2,500.00
69. Paper cups (12oz) 100's 2 pack ₱300.00
70. Biohazard waste bag 100's 2 pack ₱1,200.00
71. Conzace Vitamin C with Zinc and other supplements (softgel capsule) 100pcs/box
*This nutritional supplement is formulated with vitamins A, C, E and zinc to help enhance the body's natural immune function and help improve body resistance against illness and infections. These nutrients are also known to help the body's antioxidant defense system against damaging free radicals. Dietary intake may not be enough to meet the daily requirements to protect the body from various diseases. Thus, dietary supplementation is important to consider. 486 box ₱1,500.00
72. Washable PPE protective clothing (ESSENSA by AVA) rose quartz: color
*Each ESSENSA Essentials Kit comes with a unisex water and virus proof jacket, gartertized joggers, knee high shoe covers and a functional tote bag that's big enough to store your phone, wallet, passport, food and water. 1 set ₱2,000.00
73. Plastic Drawer-type Storage box: transparent (L 25cm, W 15cm, H 10cm) 10 set ₱280.00
74. PPE Coverall Suit (Hazmat) 50 pc ₱500.00
75. Omron Automatic Blood Pressure Monitor HEM-7156-A 1 pc ₱4,000.00
76. Nebulizer, OMRON NE-C25S 1 pc ₱2,800.00
77. Pulse Oximeter Fingertip, ROSSMAX SB100 5 pc ₱3,300.00
78. Digital Fridge Thermometer with Alarm and Max Min Temperature Easy to Read LCD Display Digital Refrigerator Freezer 1 pc ₱1,500.00
Expiration date should be more than one year and onwards upon receipt
Proponent must submit an Omnibus Sworn Statement after receipt of Notice of award
Proponent must deliver the items within (30) Thirty calendar days upon receipt of Purchase Order
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 26, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 606
Preventive Maintenance Services (Semi-annual) for the Generator Set of PSHS-CLC 2022
Request for QuotationBAC Resolution
Notice of Award
Contract of Service
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Procurement of Preventive Maintenance Services (Semi-annual) for the Generator Set of PSHS-CLC 2022 with ABC of Seventy-Five Thousand Pesos only in words and Php 75,000.00 in figures. Reference No: A2022-00-068
Details: PR No. A2022-00-068
1 Lot Procurement of Preventive Maintenance Services (Semi-annual) for the Generator Set of PSHS-CLC 2022
Item Description
Qty
Unit
Approved
Unit Cost
Supplier’s Price per Unit
Supplier’s
Total per Item
Procurement of Preventive Maintenance Services (Semi-annual) for the Generator Set of PSHS-CLC 2022
1 lot see details below
Preventive Maintenance Check-up and change oil service of the 300KVA IVECO Cursor 9 TE1 Genset (1st Half of CY 2022) 1 services ₱55,000.00
Scope of Services:
1. Mobilization and demobilization
2. Perform Preventive Maintenance check-up and change oil service
3. Provide Vehicle and one servicing technician to conduct service
4. Rectify minor probles that can be repaired on site
5. Recommend for whatever parts that will be found defective
6. Provide Service Report as proof of service completion
Preventive Maintenance Check-up of the 300KVA IVECO Cursor 9 TE1 Genset (Second Half of CY 2022) *after 6 months of first check-up 1 services ₱20,000.00
Scope of Work:
Scope of Services
1. Inspection of air filter for replacement if needed
2. Inspection of radiator for possible leaks
3. Inspection of coolant levels
4. Engine pre-heater will be inspected for proper operation and correct heat output
5. Testing of all safety circuit parameters:
-High Engine Temperature
-Low Oil Pressure
6. Overall check-up of the unit
7. Defective parts that would prevent the generator from operating correctly will be listed.
Proponent must submit an Omnibus Sworn Statement after receipt of Notice of Award
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 25, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 464
Supply and Delivery of Flu Vaccine (Quadrivalent pre-filled syringe)
Request for QuotationBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Supply and Delivery of Flu Vaccine (Quadrivalent pre-filled syringe) with ABC of ONE HUNDRED THIRTY-FIVE THOUSAND PESOS only in words and Php 135,000.00 in figures. Reference No: A2022-00-071
1 Lot of Supply and Delivery of Flu Vaccine (Quadrivalent pre-filled syringe)
Details: PR No. A2022-00-071
Description Qty Approved Budget per unit Supplier’s Unit Price
Flu Vaccine (Quadrivalent pre-filled syringe) 135 ₱1,000.00
Proponent must be familiar in proper handling of vaccines
Proponent must submit an Omnibus Sworn Statement after receipt of Notice of Award
Proponent must deliver the items not earlier than May 4, 2022 not later than May 15, 2022
Proponent must deliver the items with expiration date of (6) months or longer upon the date of delivery
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until February 4, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 510
Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022
Request for QuotationPhilippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022 with ABC of Five Hundred Seventy Thousand pesos only in words and Php 570,000.00 in figures. Reference No. A2022-00-025
Details: PR No. A2022-00-025
1 Lot Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022
Item Description
Qty
Unit
Approved
Unit Cost
Supplier’s Price per Unit
Supplier’s
Total per Item
Procurement of Monthly Preventive Maintenance Services and Trimester General Cleaning of 128 Airconditioning Units of PSHS-CLC 2022
Airconditioning Units at:
Academic Building 1
Academic Building 2
Academic Building 3
Residence Hall 1 lot see details below
Scope of Works:
A. Monthly Preventive Maintenance of Aircondition Units
1. Monthly Check-up of Aircon Units
2. Monthly Cleaning of filter cover
3. Checking of whole system cooling performance
4. Checking of drain line for possible clogging
5. Observe ACU operation
B. Trimester General Cleaning of Aircondition Units
1. General Cleaning of Aircondition units
2. General Cleaning of evaporator and condensing units
3. General Check-up of all units and recommend repair and replacement of defective parts if any
4. Observe Operation and checking of ampere reading
5. Check selector switch, thermostat control and magnetic contactors
6. Labor and Supervision
BREAKDOWN: Per Trimester - ₱190,000.00
Window Type 3 units ₱833.33
Split Type 104 units ₱1,500.00
Ceiling Type 12 units ₱1,500.00
Floor Mounted 9 units ₱1,500.00
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
Proponent must submit an Omnibus Sworn Statement upon receipt of Notice of Award
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 25, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 334
Supply and Delivery of Science Laboratory Chemicals and Reagents of PSHS-CLC for 2nd Batch CY 2021-2022
Request for QuotationBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Supply and Delivery of Science Laboratory Chemicals and Reagents of PSHS-CLC for 2nd Batch CY 2021-2022 with ABC of One Hundred Twenty-Four Thousand Two Hundred Twelve pesos in words and Php 124,212.00 in figures. Reference No: S2022-01-001
Details: PR No. S2022-01-001
Item No. Item Description Qty Unit Approved Unit Cost Supplier's Price per
Unit Supplier’s Total per Item
1. 80-90% Sodium Chlorite, unstabilized (1000g/bottle)
1 bot ₱21,725.00
2. Polyethylene Glycol Dimethacrylate or PEGDMA (n=9, stabilized with MEHQ),250ml/bottle
3 bot ₱12,958.00
3. Riboflavin, 25g/bottle 1 bot ₱10,989.00
4. Polyethylene Glycol or PEG (1000g/bottle) 1 bot ₱21,384.00
5. Polyethylene Glycol Diacrylate or PEGDA (n=9, stabilized with MEHQ), 1000g/bottle
2 bot ₱15,620.00
Special notes:
1. See PDEA certificate for PDEA required chemicals. Note that the permit is not updated due to pandemic. See also DBB memorandum for extension of permits.
2. Chemicals should be technical or analytical grade.
3. Chemicals' containers must indicate the manufacturing date, expiration date (of at least 2023 and beyond), batch number, and/or lot number.
4. A 16-section safety data sheet (SDS), not MSDS, must be attached upon delivery.
Partial bid is allowed.
Proponent must be familiar with CDC regulations and policies.
Proponent must be familiar with Government Transactions
Proponent must deliver the items within (30) thirty calendar days.
Proponent must submit a Omnibus Sworn Statement after receipt of Notice of Award.
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 local 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 24,2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 local 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 477
Supply and Delivery of Interfolded Paper Towel Dispensers and Interfolded Paper Towels for Common Comfort Rooms and PWD Toilets of PSHS-CLC
Request for QuotationPhilippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for Supply and Delivery of Interfolded Paper Towel Dispensers and Interfolded Paper Towels for Common Comfort Rooms and PWD Toilets of PSHS-CLC with ABC of One Hundred Twenty Thousand Five Hundred Fifty pesos only in words and Php120,550.00 in figures. Reference No. A2022-01-001
Details: PR No. A2022-01-001
1 Lot Supply and Delivery of Interfolded Paper Towel Dispensers and Interfolded Paper Towels for Common Comfort Rooms and PWD Toilets of PSHS-CLC
Item Description
Qty
Unit
Approved
Unit Cost
Supplier’s Price per Unit
Supplier’s
Total per Item
Supply and Delivery of Interfolded Paper Towel Dispensers and Interfolded Paper Towels for Common Comfort Rooms and PWD Toilets of PSHS-CLC 1 lot see details below
Stainless Steel square surface mounted interfolded tissue paper towel dispenser SS304
Specifications:
Satin Finish
SS304 Material around 1.1Kg
Capacity: 200pcs of paper towel
dimensions: 283*101*262mm
49 sets ₱1,950.00
Interfolded Paper Towels
Specifications:
1 ply x 175 pulls x 32 GSM
Made from 100% Virgin Pulp
Dermatologist Tested
Z-fold interleave ensures only 1 sheet taken per pull 500 packs ₱50.00
Proponent must be familiar with CDC regulations and policies
Proponent must be familiar with Government Transactions
Proponent must deliver the items within (30) Thirty Calendar days upon receipt of Purchase Order
Proponent must submit an Omnibus Sworn Statement after receipt of Notice of Award
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 24, 2022, 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 415
Supply and Delivery of Various ICT Supplies for the First Half of CY 2022
Request for QuotationBAC Resolution
Notice of Award
Purchase Order
Philippine Science High School – Central Luzon Campus (PSHS-CLC) wishes to invite proponent for the Supply and Delivery of Various ICT Supplies for the First Half of CY 2022 with ABC of Eight Hundred Six Thousand pesos only in words and Php 806,000.00 in figures. Reference No. A2022-00-005
Details: PR No. A2022-00-005
Lot 1: Supply and Delivery of Networking Supplies
ITEM DESCRIPTION
QTY
UNIT
APPROVED
UNIT COST
SUPPLIER’S PRICE PER UNIT
SUPPLIER’S
TOTAL PER ITEM
Supply and Delivery of Networking Supplies 1 lot see details below
1. UTP Cable
- At least 16 Rolls
- Category-5e 4 Pairs UTP 305 Meters Per Roll (Gray)
2. Patch Panel
- At least 7 pcs
- Straight 24-Port 1U Unloaded
3. Information Outlet
- At least 170 pcs Category-5e (Black)
- At least 75 pcs Category-5e (White)
4. Patch Cord
- At least 165 pcs Category-5e 2.0 Meters (Blue)
5. Various Materials for Roughing-In
- At least 35 pcs PVC adapter with locknut 3/4"
- At least 20 pcs PVC pipe 1/2"
- At least 20 pcs PVC adapter with locknut 1/2"
- At least 6 pcs cable tray 2"x4"x10ft
- At least 6 pcs slotted bar 1/2" x 1 1/2" x 10ft
- At least 20 pcs full threaded bar 3/8"
- At least 100 pcs grip anchor 3/8"
- At least 100 pcs nuts and washers 3/8"
- At least 80 pcs U-Bolt 1"
- At least 60 pcs U-Bolt 3/4"
- At least 120 pcs U-Bolt 1/2"
- At least 3 kgs G.I. Wire #16
- At least 50 pcs PVC Moulding 1" ₱350,000.00
Lot 2: Supply and Delivery of Documentation and ID Printing Supplies
Item Description
Qty
Unit
Approved
Unit Cost
Supplier’s Price per Unit
Supplier’s
Total per Item
Supply and Delivery of Documentation and ID Printing Supplies 1 lot see details below
1. Green Screen
- At least one (1) piece 10x24’ Accent Solid Muslin Green Background
- Must be washable and 100% cotton
- Should include 3" (At least 75 mm) rod pocket
- Must be sewn on all four sides
- Material must be matte fabric
2. Memory Card
- At least 128GB storage capacity
- Must be UHS-II, U3, Class 10
- At least four (4) pieces
- With a read speed of at least 300 MB/s and write speed of at least 260 MB/s
- Should be water, shock, and x-ray proof
- With built-in write-protect switch
- Must be a SD Extended Capacity type
3. Camera Capture Link
- Must have an unencrypted HDMI input
- At least three (3) pieces
- Should include a USB 3.0 extension cable
- Must have compatibility with Nikon, Canon, Sony, Panasonic, Fujifilm, GoPro, and Black Magic Design
- Supports Windows and MacOS
- Must work out of the box with the following software:
• Open Broadcaster Software (OBS)
• Streamlabs
• QuickTime
• Zoom
• Skype
• Google Hangouts / Meet
• Microsoft Teams
- Should support the following resolutions:
• 480p (720 by 480 resolution, up to 60 fps) NTSC
• 576p (720 by 576 resolution, up to 50 fps) PAL
• 720p (1280 by 720 resolution, up to 60 fps)
• 1080i (1920 by 1080 resolution, interlaced, up to 60 fps)
• 1080p (1920 by 1080 resolution, up to 60 fps)
• 2160p (3840 by 2160 resolution, up to 30 fps)
4. Auto Dry Box Electronic Desiccator
- Must have at least 72 Liters capacity
- At least two (2) pieces
- Must have a humidity range between 25% - 55% RH
- Should include at least two (2) plastic and at least one (1) sliding shelves
- Must be a glass door type
- Must be color black and should have a lock
- Should have a German analog hygrometer included
5. RFID Card
- Must be 125KHz TK4100 blank PVC
- Must be CR80 size
- At least one (1) set, 200pcs per set
6. Dye Film
- Must be compatible with Magicard Pronto
- Should be a full panel YMCKO
- Must have full color print side and at least 300 capacity per roll
- At least one (1) roll ₱190,000.00
Lot 3: Supply and Delivery of ICT Parts, Peripherals and Supplies
ITEM DESCRIPTION
QTY
UNIT
APPROVED
UNIT COST
SUPPLIER’S PRICE PER UNIT
SUPPLIER’S
TOTAL PER ITEM
Supply and Delivery of ICT Parts, Peripherals and Supplies 1 lot see details below
1. USB Wi-Fi Adapter
- At least ten (10) pieces
- Must have an interface of USB 2.0
- Antenna type must be omni directional
- Must support the following wireless standards: IEEE 802.11ac, IEEE 802.11a, IEEE 802.11n, IEEE 802.11g, and IEEE 802.11b
- Should support 5GHz and 2.4GHz frequencies
- Must have a 5 GHz signal rate for the following:
• 11ac: Up to 433Mbps
• 11n: Up to 150Mbps
• 11a: Up to 54Mbps
- Must have a 2.4 GHz signal rate for the following:
• 11n: Up to 200Mbps
• 11g: Up to 54Mbps
• 11b: Up to 11Mbps
- Should support the following wireless securities:
• 64/128 bit WEP
• WPA-PSK
• WPA2-PSK
• 802.1x
2. Wi-Fi Range Extender
- Must include a plug type of EU, UK, and US
- Should support the following standards and protocols: IEEE802.11ac, IEEE 802.11n, IEEE 802.11g, and IEEE 802.11b
- At least five (5) pieces
- Must have a 10/100/1000M Ethernet Port (RJ45)
- Have at least three (3) external antennas
- Supports 2.4GHz & 5GHz(11ac)
- Wireless mode should include range extender
- Wireless functions should include wireless statistic, concurrent mode boost both 2.4G/5G WiFi band, Access and LED Control, and Domain Log
- Should have a signal rate of up to 1300Mbps and 450Mpbs in 5GHz and 2.4GHz respectively
- Should support the following wireless securities:
• 64/128 bit WEP
• WPA-PSK
• WPA2-PSK
- Must have reset and power buttons
3. USB C Hub
- At least three (3) pieces
- Must have at least 1000 Mbps RJ 45 port
- Must have at least three (3) USB 3.0 ports
- Should support up to 4K HDMI port
- Must have a USB C PD port and 3.5mm audio output
- Able to read TF/SD cards
- Must be plug and play
4. Wired Keyboard
- At least five (5) pieces
- Have at least 50 million keypress-lifespan
- Must have anti-ghosting with N-key rollover technology
- Must be a wired mechanical blue switches type
- Should have a USB 2.0 passthrough connection
- Top cover must be made of aluminum-alloy
- Have at least eight (8) fully programmable keys
- Must be a full-size keyboard with magnetic wrist rest and backlit keys
- Compatible with Windows 10 and 11 OS
- With integrated onboard memory with preset macro recording keys
- Must have a USB report rate of at least 1000 Hz
5. HDMI Headless Emulator
- At least three (3) pieces
- Can simulate up to 4K resolution
- Supports Windows, Linux and Mac OS
- Must be HDMI Male connector
- Should be plug and play, hot plug
6. Motherboard
- Must have CPU support for 9th and 8th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1151 package
- Must have at least four (4) DDR4 DIMM sockets supporting up to 64 GB of system memory with dual channel memory architecture
- Must have support for DDR4 2666/2400/2133 MHz and ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules
- Must have at least one (1) D-Sub port and one (1) DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
- Must have at least one (1) HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
- Must have Realtek ALC887 codec with HD Audio with S/PDIF Output
- Must have GbE LAN chip (10/100/1000 Mbit)
- Must have at least 1 x PCI Express x16 slot, running at x16, 1 x PCI Express x4 slot, 1 x PCI Express x1 slot
- Must have a storage interface of at least 1 x M.2 connector and at least 6 x SATA 6Gb/s connectors
- Must have at least 6 x USB 3.1 Gen 1 ports and 6xUSB 2.0/1.1 ports
- Internal I/O connectors should include 1x24-pin ATX main power connector, 1x8-pin ATX 12V power connector, 1xCPU fan header, 2 x system fan headers, 1xRGB LED strip header, 1xM.2 Socket 3 connector, 6xSATA 6Gb/s connectors, 1xFront panel header, 1xFront panel audio header, 1xS/PDIF out header, 1 x USB 3.1 Gen 1 header, 2xUSB 2.0/1.1 headers, 1xTrusted Platform Module (TPM) header
- Must support Windows 10 64-bit and Form factor should be Micro ATX
- BIOS must be 2x128 Mbit flash
- At least five (5) pieces
7. Door Sensor Security Alarm
- Must be operated with AAA 1.5V batteries
- Must have a remote monitor function with 24/7 monitoring capability
- Should have a push notification and records all events triggered
- Must support 2.4GHz connection with IEEE 802.11b/g/n compliant
- Must work with Google Home and Amazon Alexa
- Must not require a hub to function
- Must have a low battery alert
- At least three (3) sets ₱110,000.00
Lot 4: Supply and Delivery of Repair and Maintenance Supplies
ITEM DESCRIPTION
QTY
UNIT
APPROVED
UNIT COST
SUPPLIER’S PRICE PER UNIT
SUPPLIER’S
TOTAL PER ITEM
Supply and Delivery of Repair and Maintenance Supplies 1 lot see details below
1. Visual Fault Locator
- At least three (3) pieces
- Must be 5Mw Fiber Optic Red Light Source
- Must have CW and Glint Mode switchable options
2. PCI-E Wi-Fi + Bluetooth Network Card
- Must be powered by Intel Chipset for Wi-Fi 6
- Compliant with network standard of IEEE 802.11ax and Bluetooth 5.0
- Must have a data rate of 802.11a/g (up to 54 Mbps), 802.11b (up to 11 Mbps), 802.11n (up to 300 Mbps), 802.11ac (up to 1733 Mbps), 802.11ax 2.4GHz (up to 574 Mbps), and 802.11ax 5GHz (up to 2402 Mbps)
- Supports the technology combination of OFDMA and MU-MIMO
- Must have a WPA3 network security
- With at least two (2) dipole antenna and one (1) external antenna base
- At least ten (10) pieces
3. 120mm Fan
- Size must be 120mm x 120mm x 25mm
- Should have a speed of at least 230rpm
- Must have Pulse Width Modulation rpm control
- Must be a dual ball bearing with 4-pin connector and 4-pin socket
- Includes mounting screws and at least 400mm cable
- At least five (5) pieces
4. 140mm Fan
- Fan size must be 140mm
- Should have a speed of at least 200rpm and up to 1350rpm
- Must have Pulse Width Modulation rpm control
- Must be a fluid dynamic bearing with PWN Plug Set
- Includes mounting screws
- At least five (5) pieces
5. Thermal Paste
- At least five (5) packs, at least 4g per pack
- Should have at least 550 poise viscosity
- Must have at least 3.2 g/cm³ density and able to withstand -40~180 °C continuous use temperature
6. Thermal Pad
- At least five (5) pieces
- Size must be at least 50mm x 50mm x 1mm
- Must be electrically non-conductive
- Thermal Conductivity must be at least 6.0 Watts per meter-Kelvin
7. Lint-Free Wipes
- At least five (5) packs, 100 pieces/pack
- Size must be at least 4” x 4”
- Must be non-abrasive
8. Microfiber Cleaning Cloth
- At least five (5) packs, 13 pieces/pack
- Must be lint-free and non-abrasive fiber cloth
- Can be safely used on Laptops, iPads, Camera Lens, and PC Monitors
9. Nylon Cable Tie
- At least 3 packs, 100pcs/pack, 150mm
- At least 3 packs, 100pcs/pack, 200mm
- At least 3 packs, 100pcs/pack, 250mm
- At least 3 packs, 100pcs/pack, 300mm
10. PC Cleaner
- Must include at least 100ml computer cleaning bottle spray, at least one (1) 20cm x 20cm microfiber cloth and one (1) brush
- Should not have alcohol, ammonia, or phosphates content
- Must be washable and reusable
- At least ten (10) sets
11. Air Duster
- At least ten (10) cans, 200g per can
- Must be dust-free, non-abrasive, and non-corrosive
- Must have a dry blast
12. Disposable Dehumidifier
- At least ten (10) pieces
- Can absorb up to 3 times its own weight in water
- At least 400ml activated charcoal dehumidifier
13. Conductive Copper Foil Tape
- At least two (2) rolls, 20M per roll
- At least 5mm wide
- Material must be Copper
- Must be double side conductive
- Must have an adhesive force of at least 1.5kg/25mm
- Should have a temperature tolerance of -10~120 °C
14. Cordless Impact Drill
- At least two (2) units
- Must be operated in 18V lithium-ion battery
- Must have a soft torque of at least 21Nm and hard torque of at least 54Nm
- Must have a no-load speed of up to 450rpm and up to 1,700rpm for 1st gear and 2nd gear respectively
- Must have a maximum impact rate of up to 27,000bpm
- Should have a maximum drilling diameter of 35mm and 10mm in wood and steel respectively
- Should also have a drilling diameter of 8mm and 10mm in masonry and screw respectively
- Must have a 2-gear function, auto-lock and led light features
- Must include 41pcs accessories set, 2 slide pack battery and one charger
- Should have a chuck capacity of at least 1.5mm and up to 13mm
15. Masonry Bits Set
- At least four (4) sets
- Must include 4mm,5mm,6mm,8mm,10mm per set
- ₱100,000.00
Lot 5: Supply and Delivery of Office Printers
ITEM DESCRIPTION
QTY
UNIT
APPROVED
UNIT COST
SUPPLIER’S PRICE PER UNIT
SUPPLIER’S
TOTAL PER ITEM
Supply and Delivery of Office Printers
1 lot see details below
1. 3-in-1 Printer with Flatbed Scanner
- At least six (6) units
- Must be capable of printing, scanning, and copying
- Must have piezoelectric printhead printing technology
- At least have a 180x1 nozzles for black and 59x1 nozzles per color (Cyan, Magenta, Yellow) nozzle configurations
- At least have a printing resolution of 5760x1440 dpi
- Should at least have the following print speed:
• Draft, A4 (Black / Color): up to 33.0 ppm / 15.0 ppm
- Should have a copying speed of at least 20 copies from standalone with a resolution of up to 600 x600 dpi
- Capable of flatbed color image scanning
- Scanner should at least have an optical resolution of 600 x 1200 dpi
- Scanner should at least have a scan area of 216 x 297mm
- Capable of handling the following paper sizes: (8.5 x 14"), Folio (8.5 x 13"), Letter and A4
- Must at least have a USB 2.0 interface
- Software must be compatible with Windows Vista / 7 / 8 / 8.1 / 10, Windows Server 2012 / 2016 / 2019 and Mac OS X 10.6.8 or later
- Must have a rated voltage of AC 220-240V with 50-60Hz rated frequency ₱56,000.00
Proponent must indicate in the RFQ / quotation the brand and model of items being offered.
Proponent must deliver the item within (30) thirty calendar days upon receipt of purchase order.
Proponent must submit an Omnibus Sworn Statement after receipt of Notice of Award.
Proponent must be familiar with CDC regulations and policies.
Proponent must be familiar with Government Terms (Delivery with proper inspection including testing and acceptance before Payment)
For more information, please contact the Bids and Awards Committee of PSHS-CLC: Tel no. (045) 499-0136 / (045) 499-5597 loc 202 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Submissions will be accepted until January 24, 2022 9:00am at the PSHS- CLC, Lily Hill St., Clark Freeport Zone, Pampanga or through email at This email address is being protected from spambots. You need JavaScript enabled to view it.
JARVIK JASON B. ROGACION
ADMINISTRATIVE OFFICER V/PROCUREMENT OFFICER
PHILIPPINE SCIENCE HIGH SCHOOL – CENTRAL LUZON CAMPUS
Telephone No. (045) 499 0136; (045) 499 5597 loc 202
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.
- Details
- Hits: 507